asynchronous machine

英 [eɪˈsɪŋkrənəs məˈʃiːn] 美 [eɪˈsɪŋkrənəs məˈʃiːn]

异步电机;异步机

计算机



双语例句

  1. Simulation and Analysis of Inverter Fed Asynchronous Machine with Broken Rotor Bar Fault
    变频器供电下异步电动机转子断条故障仿真研究
  2. The asynchronous machine is fed by cascaded multilevel inverter, and the inverter switching signals are generated by carrier phaseshifted pulse width modulation method.
    采用级联型多电平逆变器给异步电机供电,逆变器的开关信号利用载波移相脉宽调制方法生成。
  3. Digital Intellective Torque and Rotational Speed Measurement Equipment for Asynchronous Machine
    数字式异步电机转矩转速测量装置的研制
  4. The save electricity programe of non-speed governing operation on the alternating current asynchronous machine
    交流异步电动机非调速运行的节电方案
  5. Implement of Parameter Identification of Asynchronous Machine Based on DSP
    基于数字信号处理器的异步电机参数辨识实现
  6. The windings construction, connection method and shifts taps varies speed method for the single phase variable-pole multi-speed asynchronous machine are described.
    介绍了单相变极多速异步电机的绕组结构、连接规律和抽头调速法,通过分析比较电势星形图得出了一种四、六极性能兼顾的变极方案。
  7. Asynchronous machine is a nonlinear, multivariable and coupled system.
    异步电机是一个非线性、多变量、强耦合系统。
  8. Application of MATLAB in Asynchronous Machine Simulation Analysis
    MATLAB语言在异步电机仿真分析中的应用
  9. A new design method of state selector in asynchronous machine direct torque control system, i.e.multiplayer lag loop comparer design method is introduced.
    提出了异步电机直接转矩控制系统中状态选择器的一种全新设计方法&多层滞环比较设计法。
  10. Study of asynchronous machine direct torque control system with an improved flux linkage and torque regulator
    一种改进的转矩和磁链调节器异步电机直接转矩控制系统的研究
  11. A Basic Study of Fuzzy-logic-based Power System Stabilization with Doubly-fed Asynchronous Machine
    基于模糊逻辑的电力系统双反馈异步机稳定性的基础研究
  12. Several trigger methods for thyristor AC-voltage regulator as asynchronous machine soft starter are compared and analyzed in this paper, including the synchronization trigger by line voltage or phase current, and double-pulses or wide-pulses etc.
    比较分析了异步电机晶闸管交流调压软起动器中各种触发电路、电压同步和电流同步、双脉冲触发和宽脉冲触发等方案。
  13. Design of the Asynchronous Machine Torque Measuring Equipment Based on DSP
    基于DSP的异步电机转矩测量仪的设计
  14. Based on the theory of vector control and automatic control system, the vector control system of current model for doubly-fed asynchronous machine with field-oriented rotor was established.
    根据矢量控制理论和自动控制原理,建立了转子磁链定向的双馈异步电动机电流模型矢量控制系统。
  15. In this paper the multivariable model of asynchronous machine is analyzed and its three main properties are defined, in which the coupling effect of rotational emf is clarified especially.
    本文分析了异步电机的多变量数学模型,明确了它的三点性质,特别阐明了旋转电势在系统中的耦合作用。
  16. For this purpose, a dynamic mathematical model of three-phase asynchronous machine in d-q axes stationary coordinates system has been developed and the computer simulation program has been worked out.
    为了得到起动特性,建立了三相异步电动机在(d,q)静止坐标系下的动态数学模型,编制了仿真程序。
  17. Simulation Model of Asynchronous Machine With Transient Saturation of Main Magnetic Circuit
    考虑主磁路瞬态饱和时异步电机的仿真模型光耦器件瞬态饱和对微机保护装置的影响及对策
  18. The study of Direct Torque Control System of Asynchronous Machine with DC-Rail ZVT
    DC-RailZVT逆变器中异步电机直接转矩控制研究
  19. The Double Current Control Circuit of Asynchronous Machine Base on PLC
    基于PLC的异步电动机的双流控制电路
  20. The research of speed sensorless asynchronous machine vector control system based on the model reference adaptive neural network
    基于模型参考神经网络自适应异步电机无速度传感器矢量控制系统的研究
  21. This paper presents a method of detection and isolation on a pulsewidth modulation inverter supplying a asynchronous machine.
    本文介绍了一种对PWM逆变器中晶体管基极驱动开路故障的检测和隔离的方法。
  22. Finally, the asynchronous machine stator structure vibration characteristic is studied.
    最后,对异步电机定子结构振动特性展开研究。
  23. According to the power flow and calculation method of the asynchronous machine, a motor torque measuring equipment based on DSP is introduced.
    根据异步电机的功率流程和计算方法,介绍了一种基于DSP微处理器的电机转矩测量仪。
  24. The analysis compares the different of 2D and the 3D model and the winding function. Then the stator model based on the real asynchronous machine is established. The natural frequency of several kinds of 3D stator models is studied.
    分析比较了2D和3D模型的不同、绕组的作用,并建立了基于真实感应电机定子模型,研究几种定子模型的模态和固有频率。
  25. The Method of Asynchronous Machine PWM Control with Voltage Vector Reconstruction
    采用电压矢量重构的异步机PWM控制方法
  26. Analysis and Simulation of Terminal Overvoltage for PWM Inverter Fed Asynchronous Machine
    PWM逆变器供电异步电机端部过电压的分析和仿真
  27. A new scheme for trial system of Asynchronous machine is presented. The method and the result to simulate the system in MATLAB/ SIMULINK are given.
    文章介绍了一种新的异步牵引电机反馈试验方案,并用MATLAB/SIMULINK对该方案进行一定的建模与仿真,并给出仿真的方法和结果。
  28. The concrete data indicates that temperature raise will influence service life of asynchronous machine.
    用具体数据说明了温升对异步电动机寿命的影响。
  29. The electromagnetic torque control, ideal module of asynchronous machine, coordinate transform, vector control theory based on the rotor flux field-oriented were described, so the foundation of the high-performance control of asynchronous machine was built.
    通过扼要讨论异步电机的电磁转矩控制理论、理想数学模型、坐标变换和按转子磁场定向的矢量控制原理,为高性能异步电机控制奠定了理论基础。
  30. There are three types of motor, Asynchronous motor, asynchronous machine and DC motor.
    电机主要分为同步电机、异步电机与直流电机三种。